The SkyRC B6 DUO 10A/200Wx2 battery charger without / BP double

The SkyRC B6 DUO 10A/200Wx2 battery charger without / BP double
SkyRC B6 Ultimate duo 200Wx2 (SK-100017) - The powerful double battery charger allowing to load and discharge quickly two storage batteries at the same time. Is suitable for all widespread types of accumulators and batteries, including LiPo, LiIon, LiFe, NiCd and NiMH used in radio-controlled models and the weapon for a straykbol. Qualitatively loads and balances lithium batteries that significantly prolongs their service life and ensures safety of maintenance.

The SkyRC B6 Ultimate duo 200Wx2 battery charger - successfully combines possibility of a charge of two accumulators at the same time and high charge currents to 10A that saves a lot of time and reduces the inconveniences connected to a charge of several accumulators.

Process of a charge completely automatic is also controlled the microcontroller. The charge interrupts in case of failure detection or in case of achievement of the set limit: a cut-off on current and tension for lithium accumulators, on temperature and delta peak for the nickel. For all types of accumulators setup of a car of disconnect on the maximum time and capacity is possible.

For convenience the device is equipped with the built-in memory on 10 settings of charge/discharge of batteries. Now for operation with the accumulator there is no need to enter all settings, and it is enough to select one of the programs saved earlier.

Possibility of programming to 5 cycles of the continuous charge / discharge of batteries allows to recover/develop internal chemistry of accumulators and to increase overall performance of the battery to a maximum.

The external port of connection to the PC through an USB a cable (it is acquired separately) allows to view and analyze diagrams of parameters of process of charge/discharge on the computer monitor through the special software.

The original device from the vendor of SkyRC famous for the popular line of IMAX battery chargers. Originality is confirmed by a holographic sticker, serial number and a special test code.


The power supply with tension from 12 to 18V at least 400W is in addition necessary for operation;
Programmable limits of time, temperature, capacity, delta peak;
Possibility of connection to the computer for the analysis of process of a charge;
Port for a charge of an USB of devices current to 1A;
Programming to 5 cycles of charge/discharge;
Check of real accumulator capacity;
Independent balancing of LiPo of accumulators in the battery;
Memory on 10 modes of a charge;

Tags: Multikopter, a multirotor, a throne, batteries for a throne, a power of a multikopter to buy batteries for a heavy kopter, for shooting from air, the battery, the battery for terrestrial station, the battery for an efpeva, fpv
Quick Find
Use keywords to find the product you are looking for.
Advanced Search